isothermal extrusion
英 [ˌaɪsəʊˈθɜːməl ɪkˈstruːʒn]
美 [ˌaɪsəˈθɜrməl ɪkˈstruːʒn]
等温挤塑；等温挤出
双语例句
- The 3D viscoelasticity isothermal flow of plastic melts in the extrusion die for a Y-shaped plastic profiled bar was numerically simulated by using PTT viscoelastic constitutive model and penalty function finite element method.
以Y形截面异型材挤出为研究对象，采用PTT粘弹本构模型和罚函数有限元法，对塑料熔体在挤出口模内的三维粘弹性等温流动进行了数值模拟。 - According to technological characteristics of extrusion forming, the frames of the copper alloy solid column roller bearing retainer are optimized, and the isothermal extrusion technology for them is studied in the paper.
根据挤压成形的工艺特点，对圆柱滚子轴承铜合金实体保持架进行了结构优化，并进行了等温挤压成形工艺试验研究，制出了合格的样品。 - The influence of the isothermal temperature, the stirring speed and the extrusion pressure on quality of the formed parts were investigated.
研究了半固态等温温度、搅拌速率和挤压力对成型件质量的影响。 - Using finite element simulation analysis, the theoretical process parameters were verified, the feasibility of isothermal extrusion process of Al-alloy cup-shaped piece was studied, which provided a feasibility basis for the trial.
采用有限元模拟分析技术，验证了理论工艺参数，并对铝合金杯形件等温挤压成形工艺进行了可行性研究，为试验提供了可行性依据。 - Simulation and Optimization of Globoidal Cam Isothermal Extrusion Forming by 3D Rigid-Visco-Plastic FEM
弧面凸轮等温挤压成形刚粘塑性三维有限元模拟与优化 - The results show that reasonable speed criterion will realize approximately isothermal extrusion.
而对变速挤压的模拟则说明，通过建立合理的挤压速度规范，则同样可实现等温挤压。 - Isothermal extrusion technology and design of die for magnesium alloy spring plank
镁合金弹簧汽室支架等温挤压工艺与模具设计 - The focus is to design the ram velocity by using commercial finite element program. Differences in terms of load, temperature and subgrain size histories are compared between the isothermal extrusion and the normal extrusion.
研究了如何使用商用有限元软件去设计推杆速度曲线，并比较等温挤压工艺和常规挤压工艺在挤压载荷、温度以及亚晶粒尺寸分布等方面的不同。 - The key technique-simulated isothermal extrusion has been developed for purpose of higher productive efficiency and quality of aluminum profiles.
为了提高铝挤压制品的质量和产量，提出了模拟等温挤压控制。 - The Three Dimension Isothermal Viscoelastic Numerical Simulation of Gas-assisted Extrusion Molding Mechanism
气辅挤出成型机理三维等温粘弹性数值模拟研究